Potassium metaphosphate (KMP) is a condensed potassium phosphate. For cheese or concentrated milk, check how the proposed material is prepared. Compare phosphate content reported as P₂O₅ separately from the material’s polymer description.
WHO/JECFA lists potassium metaphosphate, potassium polymetaphosphate and potassium polyphosphate together for CAS 7790-53-6. The corresponding FAO monograph describes a mixture of potassium salts of linear condensed polyphosphoric acids. These names have a defined reference context; they do not identify every potassium polyphosphate blend or establish one fixed chain length.
Names in the cited identity context: KMP · Potassium polymetaphosphate · Potassium polyphosphate
Ask for the proposed food-grade material description, source, composition information and current specification. Match the commercial name to the CAS and record scope. A repeat-unit formula or phosphorus content alone does not establish the distribution of phosphate species or the preparation behavior of the proposed grade.
Preparation before measurement
The FAO identity monograph specifies particular media for its solubility and gel-formation tests. Those are identification procedures, not a food recipe or a general water-solubility guarantee. For your trial, obtain the source preparation guidance and record medium, concentration, temperature, mixing and elapsed time before measuring the prepared sample.
SPECIFICATION EXTRACT
Selected KMP specification fields
This field is selected from supplied KMP reference information. It is separate from an agreed supply specification, a standard requirement or a batch COA. Request the current material description, source, document version and test method for the proposed purchase.
Compare the proposed grade, source and current document version before agreeing acceptance limits.
On narrow screens, scroll within the table to read all columns.
Selected KMP fields from supplied product information
Parameter
Reported limit or range
Unit
Basis and test conditions
Phosphorus expressed as P₂O₅
53.5–61.5
%
Reporting basis and method not stated; not polymer assay
Lead (Pb)
≤ 0.0002
%
Supplied information; reporting basis and analytical method not stated
Arsenic (As)
≤ 0.0003
%
Supplied information; reporting basis and analytical method not stated
P₂O₅ is the phosphorus-reporting expression in this field, not a polymer-chain assay or potassium result. Its sample basis and method must accompany a comparison. The FAO monograph uses an ignited basis, but that basis has not been assigned to this supplied reference value.
For a processed-cheese brief, identify the dairy ingredients, other emulsifying salts and your target format, such as a spread or slice. Document sample preparation before comparing pH, visible separation, texture and intended melt behavior under matching mixing, heating and cooling conditions.
For an evaporated or other concentrated-milk trial, describe the protein/mineral composition, concentration process and heating stages. Agree how the material will be introduced, then observe dispersion, visible residue or separation and pH at defined stages. Select the candidate by the recorded trial, not a broad potassium-phosphate name.
Define viscosity only after preparation is repeatable
If flow or viscosity is a purchasing criterion, record the preparation medium and concentration, sample history, temperature, instrument, spindle or geometry, speed and reading time. Compare results only under matching conditions. A solution, suspension or gel should be described as the state actually measured.
These are evaluation questions. Review the exact food category, use conditions and labeling for the destination market separately from sample performance.
PACKING & ORDERING
Standard packaging and minimum order
Use these commercial details when preparing your purchasing request. Specify the required product grade, order quantity and destination when contacting sales.
Standard packaging
25 kg per bag, packed in white kraft paper bags with self-adhesive labels.
Request records for the proposed product and source. A specification states criteria, a TDS provides technical context, a COA reports an identified sample or lot, and an SDS addresses safety information. Availability and sharing terms depend on the source.
We can provide certificates for your purchasing review. Sales will confirm the applicable product, source, certificate holder and scope.
Evaluate a sample, then confirm the order
Free samples are available. Contact sales to confirm the sample quantity and discuss shipping arrangements. Record the sample grade and source, and compare them with the proposed commercial specification.
Is potassium polyphosphate always the same as KMP?
No. The cited WHO/JECFA record groups these names for a defined material identity. A commercial description may cover another composition or blend. Match the exact name, CAS, source description and specification before comparing products.
Which conditions make a viscosity result comparable?
Request the unit and complete method, including preparation medium, concentration, temperature, sample history, instrument, geometry or spindle, speed and reading time. Compare the same prepared state; a number without this context cannot define equivalent grades.
Can I assume the preparation behaves like SHMP or KTPP?
No. Match the actual phosphate identity, composition and preparation guidance, then test your medium and process. Neither the word metaphosphate nor the shared potassium component establishes equivalent behavior.
Can this replace a sodium phosphate at the same weight?
There is no general equal-weight substitution rule. Match the phosphate identity, grade, reporting basis and preparation conditions, then evaluate the complete food formulation.
What should I include in a sample request?
Include the food, process, evaluation objective and required documents. Free sample arrangements are discussed with sales; identify the sample grade and source before comparing it with a commercial offer.
Describe the dairy system, other salts, preparation medium, mixing and heating conditions, and evaluation criteria. Add your specification, quantity and destination.