Anhydrous dicalcium phosphate is calcium hydrogen phosphate without water of crystallization. For a food powder, mineral premix or dispersion trial, request the named form and particle data. An anhydrous-basis assay can also be reported for a hydrated sample.
Anhydrous dicalcium phosphate is calcium hydrogen phosphate without water of crystallization. The DCP abbreviation alone does not establish the anhydrous form. Keep source records separate from those for DCP dihydrate. An assay calculated on an anhydrous basis does not by itself establish that a supplied sample is physically anhydrous.
Also known as: DCP anhydrous · Calcium hydrogen phosphate anhydrous · Dibasic calcium phosphate anhydrous
Material identity reference — material identity, not confirmation of an offered grade or destination-market approval.
GRADE & FORM
Anhydrous DCP identity and assay basis
Verify the anhydrous material
Request a specification and SDS explicitly naming anhydrous calcium hydrogen phosphate, with the actual source and sample identifier. Food, feed, pharmaceutical and co-processed grades must not be treated as interchangeable because they share a chemical name. A form-specific file should describe the proposed food ingredient.
Read the assay definition first
A result expressed as CaHPO₄ on an anhydrous basis describes an analytical expression. It does not by itself prove the original sample had no crystallization water. Request the pretreatment, measured quantity and calculation basis; keep elemental Ca, elemental P and P₂O₅ separate from the compound assay.
Compare the named forms
Identity comparison based on the linked JECFA monograph; not commercial specification limits or equal-weight substitution advice.
On narrow screens, scroll within the table to read all columns.
Material forms to distinguish
Named form
Formula / identity reference
Hydration distinction
What to request
Anhydrous DCP
CaHPO4
No water of crystallization in its identity
Request form-specific identity and assay basis
DCP dihydrate
CaHPO4·2H2O
Two waters of crystallization in its identity
Request dihydrate records and thermal methods
SPECIFICATION CHECKLIST
Anhydrous DCP specification requirements
Use this checklist to request the proposed anhydrous DCP specification and supporting methods. It identifies records to review, not numerical acceptance limits or batch results.
Match the sample name and source across the specification, TDS and COA before comparing results. State whether each number is an agreed limit, a typical value or a result for an identified lot.
On narrow screens, scroll within the table to read all columns.
Match the physical form, analytical expression and test conditions before comparing results. For pH or solubility data, ask how the test medium, concentration, temperature and preparation are defined. A water dispersion, suspension and acid-solubility test answer different questions.
Describe the other powders, intended composition and blending/transfer route. Request particle data and review representative sampling across the blend. Observe distribution, segregation and handling under the stated process; measured mineral composition is distinct from any nutritional or label claim.
Specify the food, water conditions, pH, addition sequence, mixing and heat treatment. Record the preparation, then compare sediment, redispersion and mouthfeel at defined observation times. Do not infer water dissolution from an acid-solubility result or transfer a competitor’s particle-grade performance to another source.
These are evaluation questions. Review the exact food category, use conditions and labeling for the destination market separately from sample performance.
PACKING & ORDERING
Standard packaging and minimum order
Use these commercial details when preparing your purchasing request. Specify the required product grade, order quantity and destination when contacting sales.
Standard packaging
25 kg per bag, packed in white kraft paper bags with self-adhesive labels.
Request records for the proposed product and source. A specification states criteria, a TDS provides technical context, a COA reports an identified sample or lot, and an SDS addresses safety information. Availability and sharing terms depend on the source.
We can provide certificates for your purchasing review. Sales will confirm the applicable product, source, certificate holder and scope.
Evaluate a sample, then confirm the order
Free samples are available. Contact sales to confirm the sample quantity and discuss shipping arrangements. Record the sample grade and source, and compare them with the proposed commercial specification.
No. Dicalcium phosphate and calcium hydrogen phosphate can be used without a hydration qualifier. This page reviews the anhydrous identity; request a named form in the actual source records.
Does an anhydrous-basis assay identify the original sample?
No. The analytical basis and the sample’s hydration identity are separate. Ask for the material name, pretreatment and calculation method together.
Can I compare Ca, P₂O₅ and CaHPO₄ percentages directly?
They describe different reporting expressions. Match the measured quantity, sample basis, units and method rather than treating a mineral percentage as compound purity.
Which data help with a dispersion trial?
Request particle information and the test definition for any solubility or pH result. Share the food, mixing route, heat cycle and intended observations. Free samples, specifications, TDS, COA, SDS and customer-required certificates can be discussed with sales for the proposed source.
Describe the food powder or dispersed formulation, particle requirements, mixing and heat treatment. Add the form-specific specification, quantity and destination.