Compare xanthan gum by powder particle size and review viscosity under matching hydration and test conditions. Use the proposed grade’s specification to plan a dispersion or flow trial in your sauce, beverage or dry mix.
Xanthan gum is a fermentation-derived polysaccharide used in food thickening and stabilization. A particle-size description and a solution-viscosity result address different purchasing questions.
Buyers consider xanthan for sauces and dressings, particle-containing beverages and dry mixes. Assess powder incorporation and hydration alongside the flow and suspension requirements of the finished food.
Also known as: Xanthan
JECFA identity reference — material identity, not confirmation of an offered grade or destination-market approval.
PARTICLES & HYDRATION
Particle size, dispersion and hydration
Ask for a defined particle profile
A mesh designation describes a particle-size requirement, not the full grade. Request the sieve standard, passing percentage or distribution, and the exact grade to which the result applies. Relate the powder profile to your addition and mixing route.
Separate dispersion from hydration
Dispersion distributes the powder through the liquid; hydration is the subsequent interaction with water. Record whether powder is dry-blended or added to liquid, the addition sequence, water and salts, mixing, temperature and time. Compare viscosity only after the defined preparation is complete.
SPECIFICATIONS & METHODS
Xanthan specifications and flow measurements
Use this checklist to request a method-defined specification for the proposed food-grade xanthan. A viscosity range is useful only with its solution recipe, preparation and instrument settings; a shear value needs its own definition and procedure.
Agree acceptance limits against the named grade, source and current document version. These are procurement requirements, rather than guaranteed numerical supply specifications.
On narrow screens, scroll within the table to read all columns.
Xanthan Gum procurement checklist
Requirement
What to request
Context
Purchasing purpose
Particle profile
Sieve standard, size distribution and grade mapping
Sieve designation or particle-size method
Plan the powder-incorporation route
Viscosity and flow
Method-defined solution viscosity and, where relevant, flow measurements
Concentration/basis, solvent and salts, temperature, instrument, spindle/geometry and speed or shear rate
Keep a single reading separate from a flow profile
Hydration
Addition order, mixing, temperature and time
Defined test water and proposed food process
Record lumping and viscosity development
Shear-value definition
Definition, units and complete procedure
Source method and grade
Avoid comparing undefined shear indices
Physical, purity and microbiological criteria
Current limits and methods for the named grade
Reporting basis, drying or ash procedure, pH solution conditions and microbiological test portion
Review qualification separately from flow performance
Request the source’s current specification and relevant physical, purity and microbiological criteria. A mesh heading or undefined shear index does not establish finished-food suspension or pourability.
The reference lists the same values in the columns labeled 80 Mesh and 200 Mesh. Use these fields for preliminary comparison. Before ordering, ask for the current specification and test methods for the proposed grade and source, and confirm which grades are available.
On narrow screens, scroll within the table to read all columns.
Selected reference specification fields
Parameter
Reported limit or range
Unit
Basis and test conditions
Loss on drying
≤ 13.00
%
Drying temperature, duration and method not supplied
Ash
≤ 15.00
%
Ignition conditions and method not supplied
Lead (Pb)
≤ 2
ppm
Reporting basis and analytical method not supplied
FOOD APPLICATIONS
Xanthan in sauces, beverages and dry mixes
Sauces and dressings
Record oil, particles, salt and acidity. Compare settling at rest, pouring, coating and mouthfeel after the defined mixing and heat history.
Describe dry blending, water addition, mixing and the other gums or proteins. Observe dispersion and texture in the prepared food rather than importing a sauce result.
At rest: record the observation interval, storage temperature, sediment or separation, and how the food is redispersed.
During use: compare pouring, coating and mouthfeel at a stated serving temperature and using the same handling procedure.
After processing: record heat and mixing history, elapsed time before measurement, and the sample grade and lot. Keep these observations separate from the supplier’s solution-viscosity test.
These are evaluation questions. Review the exact food category, use conditions and labeling for the destination market separately from sample performance.
PACKING & ORDERING
Standard packaging and minimum order
Use these commercial details when preparing your purchasing request. Specify the required product grade, order quantity and destination when contacting sales.
Standard packaging
25 kg per bag, packed in white kraft paper bags with self-adhesive labels.
Request records for the proposed product and source. A specification states criteria, a TDS provides technical context, a COA reports an identified sample or lot, and an SDS addresses safety information. Availability and sharing terms depend on the source.
We can provide certificates for your purchasing review. Sales will confirm the applicable product, source, certificate holder and scope.
Evaluate a sample, then confirm the order
Free samples are available. Contact sales to confirm the sample quantity and discuss shipping arrangements. Record the sample grade and source, and compare them with the proposed commercial specification.
Does a solution-viscosity result predict finished-food flow?
It is a controlled comparison of the material under the reported test conditions. The food trial has its own recipe, preparation and observations. Keep both records so purchasing can compare the proposed grade while the technical team evaluates its use.
Does finer mesh automatically mean a better grade?
No. Particle profile, incorporation route and measurement method must match the intended process. Judge the named sample in the food, rather than ranking by a mesh heading alone.
What should a suspension trial record?
Record particles, formulation, preparation and storage; observe settling, redispersibility, pouring and mouthfeel at defined stages. A single solution-viscosity figure does not answer every observation.
Can I compare two reported shear values?
Only after obtaining the definition, units and method for each. An unspecified index is not a directly comparable flow measurement.