Ask for a defined reaction grade
A chemical assay does not establish the gas-release profile. Request the grade designation, reaction-test method and conditions relevant to your production schedule.
Sodium acid pyrophosphate (SAPP) is a leavening acid used with sodium bicarbonate. Select a food-grade candidate by checking its reaction-rate method and neutralizing value against your mixing, holding and baking schedule.
Sodium acid pyrophosphate (SAPP), also called disodium pyrophosphate, is an acidic diphosphate used with sodium bicarbonate in chemical leavening systems. Bakery manufacturers and dry-mix buyers need both a defined chemical specification and a reaction profile suited to their mixing, holding and baking schedule.
Also known as: SAPP · Disodium pyrophosphate · Disodium dihydrogen diphosphate · Acid sodium pyrophosphate
JECFA identity reference — material identity, not confirmation of an offered grade or destination-market approval.
A chemical assay does not establish the gas-release profile. Request the grade designation, reaction-test method and conditions relevant to your production schedule.
Neutralizing value concerns acid capacity against bicarbonate; reaction behavior concerns gas-release timing. Request the definition and method for each rather than using a rate code as an acid-balance value.
Scroll within the comparison on narrow screens.
| Parameter | Purchasing question | Record to request |
|---|---|---|
| Chemical content | Does the material match the agreed identity and chemical criteria? | Current specification, assay basis and corresponding COA |
| Neutralizing value (NV) | What acid capacity is used when reviewing the bicarbonate balance? | Grade-specific value, definition and measurement method |
| Reaction profile | When is gas released under the defined test conditions? | Grade designation, test procedure, temperature and time profile |
These are separate selection parameters. The supplied excerpt below does not establish an NV or a reaction-speed grade.
Selected fields from the supplied SAPP product information. These chemical and physical fields do not define a reaction grade, neutralizing value or finished-food performance.
Compare the proposed grade, source and current document version before agreeing acceptance limits.
On narrow screens, scroll within the table to read all columns.
| Parameter | Reported limit or range | Unit | Basis and test conditions |
|---|---|---|---|
| SAPP content as Na₂H₂P₂O₇ | ≥ 95.0 | % | Assay basis and method not supplied |
| Water-insoluble matter | ≤ 1.0 | % | Method not supplied |
| Loss on drying | ≤ 0.5 | % | Temperature and duration not supplied |
| pH | 3.5–4.5 | Dimensionless | 1% aqueous solution; temperature and concentration basis not supplied |
| Lead (Pb) | ≤ 4 | ppm | Supplied information; reporting basis and analytical method not stated |
| Arsenic (As) | ≤ 3 | ppm | Supplied information; reporting basis and analytical method not stated |
Review the complete current specification, including impurity requirements, with your quality team. Request grade-specific reaction and neutralizing-value information separately from assay and pH.
Request the current specificationDescribe the flour system, all leavening components, batter temperature, mixing-to-bake interval and oven profile. In the trial, record batter condition after holding and compare baked volume, shape, crumb and finished pH against your current formulation.
Review the food applicationDescribe blend uniformity, moisture exposure and the intended preparation instructions. Match the proposed reaction grade to the end user’s mixing and heating process.
Review the food applicationState the interval between mixing and baking, any chilling or freezing, and the thawing or direct-bake sequence. Evaluate the actual holding schedule as well as fresh material; a satisfactory fresh-batter result does not qualify the held product.
Review the food applicationAn original waffle study evaluated a specified SAPP grade in a defined fresh-egg batter and pilot baking process. Its formulation and results are not a general SAPP recipe or a guarantee for the proposed product.
These are evaluation questions. Review the exact food category, use conditions and labeling for the destination market separately from sample performance.
Use these commercial details when preparing your purchasing request. Specify the required product grade, order quantity and destination when contacting sales.
25 kg per bag, packed in white kraft paper bags with self-adhesive labels.
The minimum order quantity (MOQ) is 500 kg.
Request records for the proposed product and source. A specification states criteria, a TDS provides technical context, a COA reports an identified sample or lot, and an SDS addresses safety information. Availability and sharing terms depend on the source.
Review grade and source requirements
Request specification & methodsReview product technical information
Request TDSLink sample or lot results to the specification
Request COAReview handling and safety information
Request SDSSupplier qualification
Request certificates & statementsWe can provide certificates for your purchasing review. Sales will confirm the applicable product, source, certificate holder and scope.
Free SAPP samples are available. Contact sales to confirm the sample quantity and discuss shipping arrangements. Record the sample grade and source, and compare them with the proposed commercial specification.
Request a free sampleNo. Ask how the supplier defines and measures it, and connect that definition to the sampled grade. Numbers from different procedures are not automatically comparable.
The material name alone is not a substitution basis. Have the formulator review acid capacity, bicarbonate balance, reaction timing and the exact acidic SALP grade before trials.
Those fields help characterize the chemical material, but do not define bakery timing. Add the process schedule and request any available reaction-grade records.
No. The reported pH is for a 1% aqueous solution and is separate from a reaction test in a defined leavening system. Request the proposed grade’s reaction procedure and relate it to your process.
Provide the food type, current leavening system, mixing-to-bake interval and any cold holding, together with the target specification and destination. Ask sales to identify the sample grade and source before evaluation.
Send your leavening system, mixing-to-bake schedule, target grade or specification, estimated quantity and destination market.